Crown stronghold tile adhesive 4ltrs

A high quality P.V.A adhesive designed to bond glazed, ceramic and vinyl asbestos tiles to wall and floor areas. Can also be used for fixing expanded polystyrene ceiling tiles. Note: Not recommended for use with pure vinyl floor tiles.

Characteristics: A unique formulation incorporating polyvinyl acetate as the binder that imparts the high adhering properties of the product.

Advantages: Attractive appearance, quick drying, high bonding power, easily cleaned with water as the solvent.

Appearance: White viscous gel or suspension.

Application: Use a comb trowel.

Thinning & Mixing: Supplied ready for use. Thinning not necessary.

Equipment Cleaner: Water.

Pack Sizes: 1Kg, 4Kg & 25Kg

Drying Time: 4Hours

Specification for use: Prepare the surface – Ensure that the surface is clean, dry, sound and free from grease or polish. Allow new concrete floor screeds and plaster to dry out. Apply a liberal coat of the adhesive (2-3mm thick) to the wall/floor surface using a comb trowel. Do not cover too large an area at any one time. Allow to dry for approximately 1 minute. Bring tile and substrate into contact & press firmly into position. Note: Where the ceramic tiles are to be permanently submerged in water e.g. in swimming pools, use Neoprene contact adhesive.

Other Directions: Store in a cool dry place.