EPS Styrofoam
PE Styrofoam
Heat Insulation
Cement
Water Tanks
Fencing
Steel
Barbed wire
Chain link
Wire
Nails
Roofing
Tactile Stone Coated Steel Roofing Tiles
Ceiling
PVC Ceiling
Ceiling Boards
Flooring
Tiles Accessories
Tile Adhesive
Plumbing
PVC Waste Pipes and Fittings
MDF
Chip board
Block board
Plywood
Electricals
Doors
Flush Doors
Hardwood Doors
Laminated Doors
Door Locks
Kitchen Mixers
Tools
Fittings And Accessories
Paint
Gloss Paints
Crown transeal multi purpose PVA clear
KSh3,500.00
Crown stronghold parquet Adhesive 4 Kgs
KSh2,200.00
Crown stronghold tile adhesive 4ltrs
KSh1,800.00
14
People watching this product now!
Additional information
| Weight | 4 kg |
|---|---|
| Brand | Crown Paints |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
About Crown Paints
Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.
Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.
Description
A high quality P.V.A adhesive designed to bond glazed, ceramic and vinyl asbestos tiles to wall and floor areas. Can also be used for fixing expanded polystyrene ceiling tiles. Note: Not recommended for use with pure vinyl floor tiles.
Characteristics: A unique formulation incorporating polyvinyl acetate as the binder that imparts the high adhering properties of the product.
Advantages: Attractive appearance, quick drying, high bonding power, easily cleaned with water as the solvent.
Appearance: White viscous gel or suspension.
Application: Use a comb trowel.
Thinning & Mixing: Supplied ready for use. Thinning not necessary.
Equipment Cleaner: Water.
Pack Sizes: 1Kg, 4Kg & 25Kg
Drying Time: 4Hours
Specification for use: Prepare the surface – Ensure that the surface is clean, dry, sound and free from grease or polish. Allow new concrete floor screeds and plaster to dry out. Apply a liberal coat of the adhesive (2-3mm thick) to the wall/floor surface using a comb trowel. Do not cover too large an area at any one time. Allow to dry for approximately 1 minute. Bring tile and substrate into contact & press firmly into position. Note: Where the ceramic tiles are to be permanently submerged in water e.g. in swimming pools, use Neoprene contact adhesive.
Other Directions: Store in a cool dry place.
Reviews
There are no reviews yet.